TP-Link TL-SF1016 Switch User Manual


 
15
10/100Mbps Fast Ethernet Switch


Connect the Ethernet ports of the switch to the network devices by RJ45 cable as the
following figure shown.
RJ45 Port
RJ45 Cable
Connecting the Ethernet PortFigure 4-1

After completing the installation, please verify the following items:
There are 5~10cm of clearance around the sides of the device for ventilation and
the air flow is adequate.
The voltage of the power supply meets the requirement of the input voltage of the device.
The power socket, device and rack are well grounded.
The device is correctly connected to other network devices.

Plug in the negative connector of the provided power cord into the power socket of the
device, and the positive connector into a power outlet as the following figure shown.
Connecting to Power SupplyFigure 4-2
Connection