TP-Link TL-SF1048 Switch User Manual


 
01
10/100Mbps Fast Ethernet Switch


TL-SF1016/TL-SF1016DS/TL-SF1024/TL-SF1024D/TL-SF1048 switch provides 16/24/48
10/100Mbps Auto-Negotiation RJ45 ports. Each port of the TL-SF1016/TL-SF1016DS/
TL-SF1024/TL-SF1024D/TL-SF1048 supports auto MDI/MDI-X function, eliminating the
need for crossover cables or Uplink ports. The switch is Plug-and-Play and any port can be
simply plugged into a server, a hub or a switch, using straight cable or crossover cable.
The TL-SF1016/TL-SF1016DS/TL-SF1024/TL-SF1024D/TL-SF1048 16/24/48-port
10/100Mbps Fast Ethernet Switch provides you with a low-cost, easy-to-use, high-
performance, seamless and standard upgrade to improve your old network to a
100Mbps network. It will boost your network performance up to full duplex data
transfer.

Complies with IEEE802.3, IEEE802.3u standards
¾
16/24/48 10/100Mbps Auto-Negotiation RJ45 ports supporting Auto- MDI/MDIX
¾
Supports IEEE802.3X flow control for full-duplex mode and backpressure for half-
¾
duplex mode
LED indicators for monitoring power, link, activity, speed
¾
Rack-mountable steel case
¾
Internal power supply
¾

Front Panel
The front panel of The TL-SF1016 is shown as the following figure.
LEDs
10/100Mbps RJ45 Port
Front Panel of TL-SF1016Figure 1-1
The front panel of The TL-SF1016DS is shown as the following figure.
Introduction