TP-Link TL-SG1008 Switch User Manual


 
04
Gigabit Unmanaged Switch
Rear Panel
The rear panel of TL-SG1048 is shown as the following figure.
Rear Panel Figure 1-7
of TL-SG1048
The rear panel of TL-SG1024/TL-SG1016 is shown as the following figure.
Rear Panel Figure 1-8
of TL-SG1024/TL-SG1016
The rear panel of TL-SG1024D/TL-SG1016D/TL-SG1008 is shown as the following figure.
Rear Panel Figure 1-9
of TL-SG1024D/TL-SG1016D/TL-SG1008
Power Socket
Connect the female connector of the power cord here, and the male connector to
the AC power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage.
Grounding Terminal
The Switch already comes with lightning protection mechanism. You can also ground
the Switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
For detailed information, please refer to Chapter 3 Lightning Protection.
Caution: Please use the provided power cord.
Introduction
Grounding Terminal
Power Socket
Grounding Terminal
Power Socket
Grounding Terminal
Power Socket