8
Appendix B: Troubleshooting
1. The Power LED is not lit
¾ Make sure the AC power cord connected the Switch with
power source properly.
¾ Make sure the power source is ON.
2. The Link/Act LED is not lit when a device is connected
to the corresponding port
¾ Make sure that the cable connectors are firmly plugged into
the Switch and the device.
¾ Make sure the connected device is turned on and working
well.
¾ The cable must be less than 100 meters long(328 feet).
Appendix C: Contact Information
For help with the installation or operation of the TP-LINK
TL-SG1016/ TL-SG1024 16/24-port Gigabit Ethernet Switch,
please contact us.
E-mail: support@tp-link.com
Website: http://www.tp-link.com