TP-Link TL-SG1016D/TL-SG1008 Switch User Manual


 
03
Gigabit Unmanaged Switch
The front panel of TL-SG1008 is shown as the following figure.
Front Panel of Figure 1-6
TL-SG1008
LEDs
LED Status Indication
Power
On The Switch is powered on
Off The Switch is powered off or power supply is abnormal
Link/Act
On
There is a device linked to the corresponding port but
not active
Flashing The corresponding port is transmitting or receiving data
Off There is no device linked to the corresponding port
1000Mbps
On
A 1000Mbps device is connected to the corresponding
port
Off
A 10/100Mbps device or no device is connected to the
corresponding port
Note: TL-SG1048 has no 1000Mbps LEDs while its Link/Act LEDs can
indicate port speed by flashing different colors (Green:1000Mbps,
Yellow:10/100Mbps).
10/100/1000Mbps Port
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding Link/Act LED and a 1000Mbps LED. TL-SG1048
has no 1000Mbps LEDs while its Link/Act LEDs can indicate port speed by flashing
different colors (Green:1000Mbps,Yellow:10/100Mbps).
Rear Panel
The rear panel of TL-SG1048 is shown as the following figure.
Rear Panel Figure 1-7
of TL-SG1048
The rear panel of TL-SG1024/TL-SG1016 is shown as the following figure.
Introduction
Grounding Terminal
Power Socket
LEDs
10/100/1000Mbps RJ45 Port