05
Gigabit Unmanaged Switch
Make sure that the package contains the following items. If any of the listed items is
damaged or missing, please contact your distributor.
One Switch One Power Cord This Installation Guide
Two mounting brackets and the
fittings
To avoid any device damage and bodily injury caused by improper use, please observe
the following rules.
Safety Precautions
Keep the power off during the installation.
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good
skin contact and is well grounded.
Use only the power cord provided with the Switch.
Make sure that the supply voltage matches the specifications indicated on the rear
panel of the Switch.
Ensure the vent hole is well ventilated and unblocked.
Do not open or remove the cover of the Switch.
Before cleaning the device, cut off the power supply. Do not clean it by the waterish
cloth, and never use any other liquid cleaning method.
Installation