Filter
Top Products
5
AC power outlet.
Figure 3-2 TL-SG1024 Switch Rear Panel sketch
3.3 LED Indicators
The LED indicators include Power, Link/Act and 1000Mbps LED
indicators, which are used for monitoring and pre-
troubleshooting of the Switch. The following section shows the
LED indicators for the switch along with an explanation of each
indicator.
Figure 3-3 TL-SG1024 Switch LEDs sketch
¾ Power LED: This indicator will light solid red when the
Switch powers up. If the LED is not lit, please check the
power supply and connection.
¾ Link/Act LED: This indicator will light solid green when the
corresponding port is connected to another device and will
flash green when data is being transmitted or received on
the working connection.
¾ 1000Mbps LED: This indicator will light solid green when the
corresponding port is connected to a 1000Mbps device.