Filter
Top Products
163
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 260.
leave-time —— Leave Time, which is the interval between the switch receiving
a leave message from a host and the switch removing the host from the
multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1.
router-port —— Static Router Port, which is mainly used in the network with
stable topology.
Command Mode
Global Configuration Mode
Example
Modify Router Port Time as 300 seconds, Member Port Time as 200 seconds,
and Leave time as 15 seconds for VLAN 1:
TP-LINK(config)# igmp-snooping vlan-config 1 rtime 300 mtime 200 ltime 15
igmp-snooping multi-vlan-config
Description
The igmp-snooping multi-vlan-config command is used to create Multicast
VLAN. To delete the corresponding Multicast VLAN, please use no
igmp-snooping multi-vlan-config command.
Syntax
igmp-snooping multi-vlan-config {disable | enable} {vid} [rtime router-time]
[mtime member-time] [ltime leave-time] [rport router-port]
no igmp-snooping multi-vlan-config
Parameter
disable | enable —— Enable/ Disable Multicast VLAN.
vid —— The ID of the VLAN desired to modify configuration, ranging from 2 to
4094.
router-time —— Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is not
a router port any more. Router Port Time ranges from 60 to 600 in seconds. By
default, it is 300.
member-time —— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in