TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
69
Example
Enable the Guest VLAN function for VLAN 5:
TL-SL3428(config)#dot1x guest-vlan 5
dot1x quiet-period
Description
The dot1x quiet-period command is used to enable the quiet-period function.
To disable the function, please use no dot1x quiet-period command.
Syntax
dot1x quiet-period
no dot1x quiet-period
Command Mode
Global Configuration Mode
Example
Enable the quiet-period function:
TL-SL3428(config)#dot1x quiet-period
dot1x timeout
Description
The dot1x timeout command is used to configure the quiet period and the
supplicant timeout. To restore to the default, please use no dot1x timeout
command.
Syntax
dot1x timeout {quiet-period time | reauth-period time}
no dot1x timeout {quiet-period | reauth-period}
Parameter
quiet-period time ——The value for Quiet Period, ranging from 1 to 999 in
seconds. By default, it is 10. Once the supplicant failed to the 802.1X
Authentication, then the switch will not respond to the authentication request
from the same supplicant during the Quiet Period.