Filter
Top Products
TL-WA850RE
300Mbps Universal Wi-Fi Range Extender User Guide
3
LED Explanation:
Name Status Indication
RE
On
The Range Extender is connected to your router.
Blinking
The Range Extender is establishing a connection with your router.
Off
The Range Extender is not connected to your router.
Wireless
Blinking
The wireless function is working properly.
Off The wireless function is not working.
Power
On
The Range Extender is on.
Off
The Range Extender is off.
Ethernet
On
The Ethernet port is connected.
Blinking
The Ethernet port is transmitting data.
Off
The Ethernet port is not connected.
Signal
Strength
On
The number of lit LEDs indicates the strength of wireless signal.
Blinking
A connection to your router has been established, but no Internet
access yet.
Off The Range Extender is not connected to your router.
Table 1-1
(RANGE EXTENDER/WPS): If your Wireless router or AP supports WPS or QSS
function, you can press the WPS or QSS button and then press the RANGE EXTENDER
button to establish a secure connection between the Wireless router (or AP) and the Range
Extender TL-WA850RE.
RESET: This button is used to restore the Range Extender’s factory default settings.
There are two ways to reset the Range Extender’s factory defaults:
Method One: With the Range Extender powered on, use a pin to press and hold the RESET
button (about 8 seconds) until the System LED becomes quick-flash from slow-flash. And
then release the button and wait the Range Extender to reboot to its factory default settings.
Method Two: Restore the default settings from “System Tools > Factory Defaults” of the
Range Extender's Web-based management page.
ETHERNET: One 10/100Mbps RJ45 Ethernet port used to add wireless connectivity to an
Ethernet-enabled device such as Internet TV, DVR, Gaming console and so on. Please note
that this port is not allowed to be connected with router or AP.