![](http://pdfasset.owneriq.net/b/40/b40a3f44-5c9d-4b86-9d89-0f90088325b6/b40a3f44-5c9d-4b86-9d89-0f90088325b6-bg15.png)
19
Heating or
cooling system
does not respond
• Press SYSTEM button to set system to Heat. Make sure the temperature is
set higher than the Inside temperature.
• Press
SYSTEM button to set system to Cool. Make sure the temperature is
set lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• Wait 5 minutes for the system to respond.
In case of difficulty
“Cool On” or
“Heat On” is
flashing
• Compressor protection feature is engaged. Wait 5 minutes for the system to
restart safely, without damage to the compressor (see page 15).