5
Write-Protect Function
When the Write-Protect switch is set to Unlocked “ ”, you can write and read data to and
from JetFlash. When the Write-Protect switch is set to Locked “
”, you can read data from
JetFlash, but you can’t write data to JetFlash or format it. Please set the switch to Unlocked
“
” before attempting to format JetFlash.
Security Function
The Security Function is not supported by Mac or Linux Operating Systems.
You must install the U-Storage Tool found on the Driver CD to enable the Security Function.
Before installing the U-Storage Tool, ensure that the Write-Protect switch is set to Unlocked
“
” and carefully read the following sections.
Partition Types
U-Storage Tool can be used to partition JetFlash
into two partition types. Before partitioning,
you need to understand the following terms and concepts.
Type 1: “Public Area Only”
This is the default partition type for JetFlash. It allows the entire volume of JetFlash memory
to be accessed by anyone. No secure data area is established.
“Public Area Only”
Type 2: “Public Area + Security Area”
JetFlash is partitioned into a single Logical Unit Number (LUN) identified device, which
contains a Public Area and a Security Area. Secure data can be established in the Security
Area, which is protected by password. Access to data in the Public Area is unrestricted.
“Public Area + Security Area”
Public Area
Security Area
Log Out / Log In
Public Area