Transcend Information TS-RDM1 Computer Hardware User Manual


  Open as PDF
of 23
 
11
DriverInstallationforMac
™
OS9.x
1.
PuttheDriverCDintotheCD-ROMdriveandruntheInstallprogramlocatedintheMacfolderonthe
DriverCD.Followtheon-screeninstructionstocompletethedriverinstallation.Iftheproductdoesnot
attach CD, you can download the Mac 9.X driver from Transcend’s website,
http://www.transcendusa.com/Support/DLCenter/.
2.
PlugtheMulti-CardReaderintoanavailableUSBport.
3.
InsertamemorycardintotheMulti-CardReader.Adiskiconwillappearonthedesktop.Aftertheicon
appearsyoucanusethememorycardasifitwereaHardDiskonyourMac
.
Figure9.MacDriverInstallation
DriverInstallationforMac
™
OS10.1.2,orLater
Nodriversarerequired.PlugyourMulti-CardReaderintoanavailableUSBport,insertacompatible
MemoryCardandyourMac
™
willautomaticallydetectit.
DriverInstallationforLinux
™
Kernel2.4.2,orLater
Transcend’sMulti-CardReaderdoesnotrequireadevicedriverforLinuxKernel2.4orlater.Youmay
connecttheReaderdirectlytoaUSBportonyoucomputerusingthesuppliedcable.Pleasefollowthe
belowprocedurestomountandusethedevice:
1. Addthefollowingtwocommandsto/etc/modules.conf
TS-RDM1
optionsscsi_modmax_scsi_luns=2
belowusb-storagesd_mod
TS-RDM2
optionsscsi_modmax_scsi_luns=5
belowusb-storagesd_mod
TS-RDM3
optionsscsi_modmax_scsi_luns=4
belowusb-storagesd_mod
TS-RDM5
optionsscsi_modmax_scsi_luns=4
belowusb-storagesd_mod
2. Plug the Multi-Card Reader into an available USB port using the supplied cable and restart the
computer.YourcomputerautomaticallydetectstheMulti-CardReader.
3. CreateadirectoryfortheMulti-CardReader.
UsewithaComputer
 previous next