Transcend Information TS-USL3 Computer Hardware User Manual


 
Make sure you have a 1.44 MB formatted, non-bootable diskette in
the floppy drive when using this utility.
NOTE: This utility MUST be run from the \MAKEDISK directory.
Alternately, you can use the following .BAT files (located
in the root directory on this CD) to simplify this process:
MAKEW95.BAT -- Creates a drivers disk for Windows 95.
MAKEW98.BAT -- Creates a drivers disk for Windows 98.
MAKENT.BAT -- Creates a drivers disk for Windows NT.
MAKEW2K.BAT -- Creates a drivers disk for Windows 2000.
MAKENW.BAT -- Creates a drivers disk for Novell NetWare
servers and clients.
62 APPENDIX
where [operating system] is the OS for which you are creating the
diskette, and [destination] is the drive letter and path (such
as A:). If no destination is specified, the A: drive will be used.
The possible [operating system] options are:
NT = Microsoft Windows NT
W2K = Microsoft Windows* 2000
W95 = Microsoft Windows 95
W98 = Microsoft Windows 98
NW = Novell NetWare servers and clients
DOS = Microsoft DOS and IBM OS
If you need to use a floppy disk to install the adapter
drivers, use the MAKEDISK.BAT utility located in the
\MAKEDISK directory on this CD.
MAKEDISK [operating system] [destination]