Filter
Top Products
2.4.8 IrDA-Compliant Infrared Module Connector (10-pin IrDA)
The IrDA connector can be configured to support a wireless infrared module. With this module
and application software such as Laplink or Win95 Direct Cable Connection, users can transfer
files to or from laptops (notebooks), PDAs and printers. You must also configure the setting
through “UART Mode Select” in “Integrated Peripherals” in BIOS setup to select “IrDA”. Connect
the Standard IR (SIR) device to the onboard SIR connector according to the pin definitions. An
optional Consumer Infrared (CIR) set connects to the CIR and SIR connectors simultaneously for
both wireless transmitting and remote control functions through one external infrared module.
20 HARDWARE INSTALLATION
IrDA Connector
IrDA
DIMM1
(
64bit 168pin SDRAM Module
)
DIMM2
(
64bit 168pin SDRAM Module
)
PCI Slot1 (PCI1)
PCI Slot2 (PCI2)
PCI Slot3 (PCI3)
CPU-FAN
WOL
FDC
IDE2
IDE1
GMCH
COMB
AC97
IntelICH
66/100MHz
Pin1
COMA
VGA
Parallel Port
Game Port
Line
_
in
MIC
Line
_
out
Li Batter
y
Transcend
+5V
IRRX
NC
GND
IRTX
NC
5VSB
CIRRX
NC
NC
12
910
CIRSIR