Transition Networks CPSMP-200 Power Supply User Manual


  Open as PDF
of 7
 
User’s Guide
CPSMP-200
AC Power Supply Module
• PointSystem™
• CPSMC18xx-xxx Accessory
• CPSMC19xx-100 Accessory
The Transition Networks CPSMP-200 power supply is a slide-in-module that
provides optional, redundant AC power to the CPSMC18xx-xxx and the
CPSMC19xx-100 PointSystem™ chassis.
The figure below illustrates the components of the CPSMP-200 power supply:
•A power LED indicator.
• An AC power connector that supplies power from an AC wall outlet.
•A fuse installed in a fuse holder.
• An On/Off switch that, when set to “I”, allows the module to supply
power to the PointSystem™ chassis.
•A Primary/Secondary switch that allows the module to be configured as
the “primary” or as the “secondary” power supply.
•A Management/Manual switch that allows the PointSystem™ software to
control and override the physical setting of the Primary/Secondary switch.
•A fan to cool the interior of the PointSystem™ chassis.
•A handle for installing and removing the power supply module.
Management/Manua
l
Switch
Primary/Secondary
Switch
I
0
Power LED
AC Power Connector
Fuse Holder
On/Off Switch
Handle
Fan
Installation . . . . . . . . . . . . . . . .2
Maintenance . . . . . . . . . . . . . . .6
Technical Specifications . . . . . .9
Troubleshooting . . . . . . . . . . .10
Contact Us . . . . . . . . . . . . . . .11
Compliance Information . . . . .12
next