Filter
Top Products
110
Pin out of POE Midspan Hub/Switch
Pin Signal / Name
1 RX+
2 RX-
3 TX+
4 VCC+
5 VCC+
6 TX-
7 VCC-
8 VCC-
Pin out of POE Endspan Hub/Switch
Pin Signal / Name
1 TX+/VCC+
2 TX-/VCC+
3 TX+/VCC-
4
5
6 TX-/VCC-
7
8
Note
‘+’ and ‘-‘ signs represent the polarity of the wires that make up each wire pair.
Before you powered PD, please check the RJ-45 connector pin assignment
follow IEEE802.3af standard, otherwise you may need change one of the
RJ-45 connector pin assignment, which attached with the UTP cable.
All ports on this switch support automatic MDI/MDI-X operation, you can use
straight-through cables for all network connections to PCs or servers, or to other
switches or hubs. In straight-through cable, pins 1, 2, 3 and 6, at one end of the cable,