Filter
Top Products
91
5-4-6-4. MAC Filtering
MAC address filtering allows the switch to drop unwanted traffic. Traffic is
filtered based on the destination addresses.
Steps to specify a MAC address to filter:
1. In the MAC Address box, enter the MAC address to filter.
2. If tag-based (802.1Q) VLAN are set up on the switch, in the VLAN ID box,
type the VID to associate with the MAC address.
3. Click the Add button.
4. To delete a MAC address, highlight the selection in the table you want to
delete and then click the Delete button.
NOTE: Changing the VLAN type in the Advanced Switch Setting menu will
cause the contents of this table to clear
.