Filter
Top Products
12
SBFTF10xx-10x
24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Cable Specifications -- Continued
SBFTF1029-100 1310 nm (TX) / 1550 nm (RX) simplex
SBFTF1029-101 1550 nm (TX) / 1310 nm (RX) simplex
Fiber-optic Transmitter Power: min: -13.0 dBm max: -6.0 dBm
Fiber-optic Receiver Sensitivity: min: -32.0 dBm max: -3.0 dBm
Link Budget: 19.0 dB
SBFTF1029-102 1310 nm (TX) / 1550 nm (RX) simplex
SBFTF1029-103 1550 nm (TX) / 1310 nm (RX) simplex
Fiber-optic Transmitter Power: min: -8.0 dBm max: -3.0 dBm
Fiber-optic Receiver Sensitivity: min: -33.0 dBm max: -3.0 dBm
Link Budget: 25.0 dB
SBFTF1035-100 (long wave) 1550 nm multimode
Fiber Optic Transmitter Power: min: 0.0 dBm max: +5.0 dBm
Fiber Optic Receiver Sensitivity: min: -36.0 dBm max: -3.0 dBm
Link Budget: 36 dB
SBFTF1039-100 1300 nm multimode
Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm
Fiber Optic Receiver Sensitivity: min: -30.0 dBm max: -14.0 dBm
Link Budget: 11dB
The fiber optic transmitters on this device meet Class I Laser safety requirements
per IEC-825/CDRH standards and comply with 21 CFR1040.10 and
21CFR1040.11.
Copper Cable
Category 3: (Minimum requirement for 10 Mb/s operation)
Gauge 24 to 22 AWG
Attenuation 11.5 dB/100m @ 5-10 MHz
Maximum Cable Distance 100 meters
Category 5: (Minimum requirement for 100 Mb/s operation)
Gauge 24 to 22 AWG
Attenuation 22.0 dB /100m @ 100 MHz
Maximum Cable Distance 100 meters
• Straight-through or crossover twisted-pair cable may be used.
• Shielded (STP) or unshielded (UTP) twisted-pair cable may be used.
• Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .
• Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
• Do not use flat or silver satin wire.
Crossover Cable
1
2
3
6
Straight-Through Cable
Twisted Pair #1
Twisted Pair #1
Twisted Pair #2
Twisted Pair #2
1
2
3
6
1
2
3
6
1
2
3
6
techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.
13
Technical Specifications
For use with Transition Networks Model SBFTF10xx-10x or equivalent.
Standards IEEE 802.3™
Data Rate 10 Mb/s, 100 Mb/s
Dimensions 3.25" x 1.0" x 4.7" (83 x 25 x 119 mm)
Weight 10 oz. (283 g) (approximate)
Power Consumption 4.95 watts
Power Supply 12 VDC, 0.8 Amp (N. America, Europe, Japan, UK)
12 VDC, 1.25 Amp (Latin Am., Australia, N.Z., S. Africa)
(The external power supply provided with this product is
UL listed by the power supply’s manufacturer.)
MTBF 426,000 hours (MIL217F2 V5.0) (MIL-HDBD-217F)
1,326,000 hours (Bellcore7 V5.0)
Packet Size: Memory: 256K bytes (2 Mbit)
Unicast MAC addresses: 4K
Maximum packet size: 1536 bytes
Environment Tmra*: 0 to 50°C (32 to 122°F )
Storage Temp: -20 to 85°C (-4 to 185°F)
Humidity: 5 to 95%, non condensing
Altitude: 0 to 10,000 feet
Warranty Lifetime
*Manufacturer’s rated ambient temperature.
The information in this user’s guide is subject to change. For the most up-to-date
information, view the user’s guide on-line at: www.transition.com.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR,
Subchapter J applicable at the date of manufacture.
CAUTION: Visible and invisible laser radiation when open. Do not stare into the
beam or view directly with optical instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Troubleshooting
1. Is the power LED illuminated?
NO
• Is the power cord properly installed in the media converter and at the
external power source?
• Does the external power source provide power?
• Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
YES
• Proceed to step 2.