TRENDnet 108Mbps 802.11g Wireless Firewall Router Network Router User Manual


 
38
3.6 Management
Management enables you to set up SNMP and Remote Management feature.
3.6.1 SNMP
This screen enables you to configure SNMP.
Enabled/Disabled: Click to enable or disable SNMP.
System Name: Displays the name given to the router.
System Location: Displays the location of the router (normally, the DNS name).
System Contact: Displays the contact information for the person responsible for the
router.
Community: SNMP system name for exchanging SNMP community messages. The
name can be used to limit SNMP messages passing through the network. The default
name is 'public.'
Trap Receiver: Type the name of the destination PC that will receive trap messages.