Filter
Top Products
9
English
3. The configuration page will appear, then you can make changes on the
Access Point to match your existing network’s settings such as IP address
and Subnet Mask.
4. Scroll down the page to the Wireless section. If you already have a wireless
network, change the SSID/Channel and Encryption settings to match your
wireless network's settings.
5. After you've made the changes, click the Apply button to save the settings.
The Access Point is now configured and ready to use with your network.
NOTE: If you cannot access the configuration page, please check your
TCP/IP settings again. To find out more information on the Access Point
features, please go through the User’s Guide on the CD-ROM.