Filter
Top Products
4.2 How to change the IP Address
If you wish to change the default IP address of TEW-210APB, please click the
tab “ Setup “ “ Bridge “ “ IP configuration “ as Figure3. With this table,
please change the IP address what you expected.
Figure 3
IP Address : Please assign an unique IP address for this unit.
IP Mask : Please specify the proper subnet mask for this unit.
Gateway : There is a portal for packet incoming or outgoing which need
to routing process.
DHCP Enable : The preferred method of providing IP addresses for your
Access Points is applying a DHCP server in your network. If you do and
enable this setting, the Access Points will acquire an IP address
automatically from this server.
Primary Port: The major communication portal for configuration.
8