Filter
Top Products
2
UNPACKING AND SETUP
This section provides unpacking and setup information for the Wireless LAN USB
2.0 Adapter.
Unpacking
The box should contain the following items:
One Wireless LAN USB 2.0 Adapter
One Driver & Utility CD-ROM
One Quick Installation Guide
One Type-A USB male to female extension cable
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
Before installation, check the following:
Make sure your computer is running at least a 300Mhz or above processor with
256MB RAM or above
Make sure the USB ports are USB 1.0, 1.1 or 2.0
The operating system on your computer must be the following: Windows
XP/2000/ME/98SE
Make sure the environment has minimal interference and obstructions.
Connecting the USB Extension Cable
The USB extension cable that comes with the Adapter has Type A connectors on
both ends. One end of the cable is a male Type A connector that plugs into the PC’s
USB port. The other end of the cable is a female Type A connector that plugs into
the Adapter.
This USB extension cable can be adjusted to improve the wireless connection. It is
recommended that the Wireless LAN USB 2.0 Adapter is perpendicular to the
ground.