TRENDnet TFM-PCIV92A Modem User Manual


 
TFM-PCIV92A User’s Guide
_________________________________________________________________________________________________________________________
- 25 - Rev.1.00.2.1.34
Appendix 4 Result Codes Summary
OK 0
CONNECT 1
RING 2
NO CARRIER 3
ERROR 4
CONNECT 1200 EC* 5
NO DIAL TONE 6
BUSY 7
NO ANSWER 8
DELAYED 88
BLACKLISTED 89
BLACKLIST FULL 90
CONNECT 300 EC* 40
CONNECT 2400 EC* 10
CONNECT 4800 EC* 11
CONNECT 7200 EC* 24
CONNECT 9600 EC* 12
CONNECT 12000 EC* 25
CONNECT 14400 EC* 13
CONNECT 16800 EC* 86
CONNECT 19200 EC* 14
CONNECT 21600 EC* 55
CONNECT 24000 EC* 56
CONNECT 26400 EC* 57
CONNECT 28000 EC* 100
CONNECT 28800 EC* 58
CONNECT 29333 EC* 101
CONNECT 30666 EC* 102
CONNECT 31200 EC* 59
CONNECT 32000 EC* 70
CONNECT 33333 EC* 103
CONNECT 33600 EC* 60
CONNECT 34000 EC* 71
CONNECT 34666 EC* 104
CONNECT 36000 EC* 72
CONNECT 37333 EC* 105
Verbose Code Numeric Code
TFM-PCIV92A User’s Guide
_________________________________________________________________________________________________________________________
- 26 - Rev.1.00.2.1.34
CONNECT 38000 EC* 73
CONNECT 38400 EC* 28
CONNECT 38666 EC* 106
CONNECT 40000 EC* 74
CONNECT 41333 EC* 107
CONNECT 42000 EC* 75
CONNECT 42666 EC* 108
CONNECT 44000 EC* 76
CONNECT 45333 EC* 109
CONNECT 46000 EC* 77
CONNECT 46666 EC* 110
CONNECT 48000 EC* 78
CONNECT 49333 EC* 111
CONNECT 50000 EC* 79
CONNECT 50666 EC* 112
CONNECT 52000 EC* 80
CONNECT 53333 EC* 113
CONNECT 54000 EC* 81
CONNECT 54666 EC* 114
CONNECT 56000 EC* 82
CONNECT 57600 EC* 18
CONNECT 115200 EC* 87
Note:
* EC only appear when the extended result codes configuration option is enabled. EC is
replaced by one of the following symbols, depending upon the error control method used:
V.42bis - V.42 error control and V.42bis data compression.
V.42 - V.42 error control only.
MNP5 - MNP class 4 error control and MNP class 5 data compression.
MNP4 - MNP class 4 error control only.
NoEC - No error control protocol.
Verbose Code Numeric Code