Filter
Top Products
ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
Hot Key Commands
A keyboard hot key command consists of three keystrokes:
Hot Key command = Scroll Lock + Scroll Lock + Command key(s)
After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key
again. You then have another 2 seconds to press a command key. A beep confirms that
the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the
switch will exit hot key mode.
To select a specific PC port:
For TK-803R
Select PC=
For example, to Select Port 1 on the TK-803R you hit the following key sequence:
Select PC=
For TK1603R
Select PC=
For example, to select Port 1 on the TK-1603R you hit the following key sequence:
Select PC =
To select port 10 on the TK-1603, hit the following key sequence:
Select PC =
5
Scroll Lock
Scroll Lock
+
+
Y
Scroll Lock
Scroll Lock
+
+
1
For a list of all the Hot Key commands, please see the Quick Reference Sheet.
MAC USERS
Standard PC Keyboard to MAC Keyboard mapping information:
CD/DVD drive
eject key
F13
F15
F14
Scroll Lock
Scroll Lock
C
++
Scroll Lock
Scroll Lock
F10
++
Scroll Lock
Scroll Lock
F11
++
Scroll Lock
Scroll Lock
F12
++
=
=
=
=
Scroll Lock
Scroll Lock
+
+
Y
+
Z
Scroll Lock
Scroll Lock
+
+
0
+
1
Scroll Lock
Scroll Lock
+
+
1
+
0