Filter
Top Products
- 22 -
Setup Wizard
The “Setup Wizard” will hlep you to change all the configurations
step by step. Please follow below steps to finish it
System
In this field, you can configure the basic information of your print
server.
Server Name: Assign a name to the print server. The default server
name is set to PS (the prefix of print server) following by the last 6
digits of the Mac address.
Port Name: Assign the Port Name for the print server
Password: Enter the Administrator password (3-8 characters).
NOTE: Password must within 3-8 characters. Failed to follow it will
not active the password function.