Filter
Top Products
Rack Installation
Your switch comes with two rack mounting brackets. you
can use these brackets to mount the switch on an EIA
standard 19" rack. Attach the brackets to the switch,
using the screws provided.
Figure 3-2. Attaching the mount brackets for rack
installation
Next, install the switch in the rack using the screws
provided to attach the brackets to the rack.
Supplying Power
The 4-Slot Modular Switch is equipped with a universal
switching power supply that accepts AC input voltages
from 100 to 240VAC and 50 to 60 Hz.
To supply power to your switch:
1. Plug the connector of the power cord into the power
port on the rear panel of your switch.
2. Plug the other end of the power cord into an AC wall
outlet.
3. Set the power switch to ON and verify that the Power
LED is lit. If it is not, check the following:
The power switch is in the ON position.
The power cord is properly connected to the wall
outlet and to the power connection on the switch.
The wall outlet is functional.
Note: Network cable segments can be connected or
disconnected from the switch while the power is on,
without interrupting the operation of the switch.
Connecting the Switch
You can connect your switch to network devices such as
desktops and workgroups or to other hubs.
Before connecting your switch to a desktop or workgroup