Filter
Top Products
5
HARDWARE INSTALLATION
LED Indicator
LNK/ACT (Link/Activity)
The LNK indicator indicates green when the Wireless PCI Adapter is
connected to a network successfully. Otherwise the LNK indicator
blinks green continuously whiles the Wireless PCI Adapter is
scanning the wireless devices or transmitting data.
Check the installation
1. Shut down the computer, unplugs its power cord, and remove the
chassis cover.
2. Insert the contact edge of the Wireless PCI Adapter into the
connector of any available PCI Bus slot. Press the card firmly into
the connector such that the card’s contacts are fully seated in the
PCI slot connector.
3. Install the bracket screw and secure the card to the computer chassis.
4. Cover the computer’s chassis.
5. Switch computer power on. The computer will automatically
activate the newly installed driver and utility the Wireless PCI
Adapter.