Filter
Top Products
English
6
Hot-Key Commands
A keyboard hot-key command consists of at least three keystrokes:
Hot-Key command = ScrLk + ScrLk + Command key(s)
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
You then have another 2 seconds to press a command key. A beep confirms
that the KVM switch is in "Hot-Key" mode. If you do not press a key within 2
seconds, the switch will exit hot-key mode.
To select a specific PC port:
1
0
B
1
0
Z
0
1
A
0
1
Y
ScrLk
ScrLk
ScrLk
ScrLk
ScrLk
ScrLk
For example, to select port 1, hit the following key sequence:
Select PC =
Select PC =
Select PC =
Port numberBank number
th
For example, to select port 10 of the 10 KVM switch on a series of daisy
chained TK-1602R's you hit the following key sequence:
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Note: When using the KVM switch standalone, type in 0 + 1 for the bank
number.
For a list of all the Hot-Key commands, please see the Quick Reference Sheet.