15
INTERNET BROADBAND ROUTER CONFIGURATION
First, make sure that the network connections are functioning normally.
This Internet Broadband Router can be configured using Internet Explorer
5.0 or later.
Login to the Internet Broadband Router
1. Open Internet Explorer 5.0 or higher.
2. Enter http://192.168.0.1
(the factory-default IP address setting) in
the address bar.
3. When the following dialog box appears, type in admin for the user
name. Leave the password field blank, (by default, there is no
password) and click LOGIN.
Note: If you need to set a password, refer to the Administrator Settings
in Advanced Setup.
4. Two setup options appear: Quick Setup or Advanced Setup. It is
recommended that you use Quick Setup if you are a beginner. It will
lead you through the configuration step-by-step.
16
Quick Setup
On the main webpage, select “Quick Setup” to specify the Time Zone and
the WAN connection type.
1-1 Time Zone
Select the appropriate time zone so your system clock can synchronize
itself through the SNTP Server.
1-2 WAN Connection Type
To select the WAN connection-type, click Dynamic IP (Cable Modem),
Static IP (Fixed-IP), PPPoE (Dial-up xDSL) or PPTP
