Filter
Top Products
Peak output
capacity (watts)
INVERTER MODE - Double Boost rated to 7200 watts peak (up to 10 seconds). Overpower rating supports longer
term overloads to 5400 watts for up to 15 seconds prior to inverter shutoff.
INPUT
Input connection
type
DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Input cord length DC INPUT: User supplies cabling. 8 gauge or larger (see manual). AC INPUT: user supplies hardwire input cabling
Recommended
Electrical Service
DC INPUT: Requires 36VDC input source capable of delivering 114A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
applications, professional hardwire
Maximum input
amps / watts
DC INPUT: Full continuous load - 114A at 36VDC. AC INPUT: 26 amps at 230VAC with full inverter and charger load
(10.4A max charger-only / combined input load to support charger and AC output is automatically controllable to
66%-33%-0% based on AC output l
BATTERY
Expandable
battery runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage 36V
Battery recharge
rate
30 amp
VOLTAGE REGULATION
Voltage regulation
description
Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels
Overvoltage
correction
Over-voltages are automatically reduced by 10%
Brownout
correction
Brownouts are automatically boosted by 10%
LEDS ALARMS & SWITCHES
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In
AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to
maintain continuous AC power to connected loads.
PHYSICAL
Shipping weight
(lbs)
63
Shipping weight
(kg)
28.6
Shipping
Dimensions
(HWD/in)
13.5 x 15 x 21.5
Shipping
Dimensions
(HWD/cm)
34.3 x 38.1 x 54.6
Unit weight (lbs) 58
Unit weight (kg) 26.3
Unit Dimensions
(HWD/in)
7.25 x 8.5 x 14
Unit Dimensions
(HWD/cm)
18.4 x 21.6 x 35.6
Material of
construction
Polycarbonate
Form factors
supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting
information)
Cooling method Multi-speed fan