Tripp Lite B130-101 Network Card User Manual


  Open as PDF
of 16
 
4
Installation
Note: You should test to make sure the entire installation works properly before pulling
cables through ceilings/walls.
Safety Information
1
ConnectthecomputertotheLocalUnit“SourceVideo”portusinga
HD15monitorcable.
2
Youcanchoosetoconnectalocalmonitortothe“LocalVideo”porton
theLocalUnit.
3
ConnecttheLocalUnittotheRemoteUnitusingapatchcable.The
B130-101canextendavideosignalupto500ft.(150m)usinga
standardCat5/5e/6cable.
4
ConnecttheRemotemonitortothe“Video”portontheRemoteUnit
usingaHD15monitorcable.
5
Plugtheincluded12.6V,3ApowersupplyintotheLocalUnit.
6
Turnthedisplay(s)onfirst.
7
Turnonthecomputer.
8
Ifthevideoonyourmonitoriseithertoodarkortoolight,usethe“Gain”
adjustmentundertheRemoteUnittomodifyit.
9
Ifthevideoonyourmonitorshowsafuzzyor“ghosting”effect,usethe
“EQ”adjustmentundertheRemoteUnittomodifyit.
A.Toreducetheriskofelectricshock,donotexposethisproductto
moisture.
B.Operatethisproductusingonlytheincludedexternalpowersupply.Use
ofotherpowersuppliescouldimpairperformance,damagetheproduct,
orcausefire.
Local Unit
Remote Unit
200810164 93-2849.indd 4 12/1/2008 4:50:41 PM
 previous next