Tripp Lite BCPERS450 Power Supply User Manual


 
3 front panel LEDs indicate line power, battery power and battery low/replace status
450VA/280 watt power handling ability supports a variety of computer, internetworking, telecom and consumer electronics equipment
Supports user battery replacement via built-in access panel
Compatible with 120V/60Hz applications in USA, Canada, Mexico and more
2 year manufacturers warranty
$100,000connected equipment insurance (USA, Puerto Rico, & Canada only)
Specifications
SYSTEM OVERVIEW
Voltage compatibility 120V AC
Frequency
compatibility
60Hz
OUTPUT
Output VA 450
Output watts 280
Output nominal
voltage
120V AC (line mode) / 115V AC (battery mode)
Output voltage
regulation
PWM sine wave 115V +/-5% (battery mode)
Output frequency
regulation
LINE MODE: Passes line frequency of 60Hz +/-10%
BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
Outlet quantity / type 3 NEMA 5-15R
INPUT
Maximum input amps 3.1A
Input connection type NEMA 5-15P
Input cord length 6 ft., 18 gauge
Recommended
Electrical Service
15A 120V
BATTERY
Full load runtime 4 minutes (450VA)
Half load runtime 15 minutes (225VA)
DC system voltage 12 VDC
Typical battery
lifespan
3-6 years, depending on usage
Battery recharge rate 3.6 hours to 90%
Replacement Battery
Cartridge
RBC51
LEDS ALARMS & SWITCHES
Front panel LEDs 3 front panel LEDs indicate line power status, battery power status and battery low/replace status
Alarms Audible alarm with 15 second delay sounds to indicate loss of utility power. Alarm can be silenced by pressing front
panel alarm cancel button. Once silenced, alarm will re-sound when approximately 2 minutes runtime remain.
Switches Includes 2 front panel switches—one main on/off power switch and one dual function "alarm cancel" / "self test" button
SURGE / NOISE SUPPRESSION
AC surge suppression 252 joules
AC suppression
response time
Instantaneous
Dataline suppression -
EMI / RFI AC noise
suppression
Yes