Tripp Lite BCPRO1400 Power Supply User Manual


 
Alarms Audible alarm with 15 second delay sounds to indicate loss of utility power. Alarm can be silenced by pressing front
panel alarm cancel button. Once silenced, alarm will re-sound when approximately 2 minutes runtime remain.
Switches Includes 2 front panel switches—one main on/off power switch and one dual function "alarm cancel" / "self test" button
SURGE / NOISE SUPPRESSION
AC surge suppression 480 joules
AC suppression
response time
Instantaneous
Dataline suppression -
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Shipping weight (lbs) 40
Shipping weight (kg) 18.2
Unit weight (lbs) 36.4
Unit weight (kg) 16.5
Unit Dimensions
(HWD/in)
12.75 x 7.5 x 9
Unit Dimensions
(HWD/cm)
32.4 x 19.1 x 22.9
Material of
construction
PVC
Form factors
supported
Tower
Cooling method Convection
Battery Access Battery access door allows user replacement of UPS batteries
ENVIRONMENTAL
Relative Humidity 0 to 95%, non-condensing
Storage Temperature +5 to +122 degrees Fahrenheit
Operating
Temperature
+32 to +104 degrees Fahrenheit
COMMUNICATIONS
Network monitoring
port
USB
Software and cabling
included
PowerAlert software available for free download at www.tripplite.com, includes USB cable.
WatchDog
compatibility
Compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of
application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications
LINE / BATTERY TRANSFER
Transfer time from
line power to battery
mode
2-4 milliseconds
Low voltage transfer
to battery power
Switches to battery power as line voltage decreases to 99 volts or less. Resets back to line power mode as line
voltage increases to 104V or higher.
High voltage transfer
to battery power
Yes
SPECIAL FEATURES
Cold Start Yes, inverter can be "cold started" to enable temporary AC output during a power failure
Appearance Attractive gray tower UPS
CERTIFICATIONS