Filter
Top Products
2
Specifications
All surge suppressors listed have component response times of less than 1 picosecond.
Nominal Clamping Peak Pulse
Model Description Voltage Current
DHUB/DHUB-18V
DHUB: RJ45, 8-port ethernet, 7.5 volts, protecting wires 1-8 750 amps
token ring RS422/423/485, on all ports
AS400/Sys3x protector for
hubs, repeaters, terminal
servers, MUXs, MAUs, etc.*
DHUB-18V: RJ45, 8-port 18 volts, protecting wires 1-8 340 amps
RS 232 protector for on all ports
multiport serial devices.*
DRS232
RJ45/RJ11 protector for 18 volts, protecting 1340 amps
100Base-T4, RS232 on wires 1-8
twisted pair (wires 1-8) or
ISDN “S/T” interfaces.Supplied
with 4" RJ45 patch cable.
DNET1
RJ45 100Base-T, 10Base-T, 7.5 volts, protecting wires 1-8 750 amps
Token Ring, RS422, AS400/
Sys3x protector for NICs,
hubs, routers, etc. Supplied
with 4" RJ45 patch cable.
DSUT1CSU
RJ45/RJ11 protector for 60 volts, protecting wires 1-8 200 amps
nonspan powered T-1
equipment, digital data service
CSUs/DSUs, ISDN “U”
interfaces or other digital lines.
Supplied with 4" RJ45 patch
cable.
DTEL2
RJ45/RJ11 for modems, 260 volts, protecting center 250 amps
answering and fax 4 wires (2 CO-lines)
machines. Supplied with
4" RJ11 patch cable.
DB9
Serial DB9 RS232 protector for 18 volts, protecting pins 340 amps
male or female
ports of data 1-9 and chassis
terminal and computing
equipment including PCs,
modems, etc. (any male or
female 9 pin port). Male/Female
genders are reversible with
reversible thumbscrews.
DB9
DB15 ethernet AU protector 7.5 and 18 volts, protecting all 750 amps
IEEE 802.3 pins
* Supplied with eight 4” RJ45 patch cables.
200207034 93-2082 DUSB(DS4486) Owner’s Manual.qxd 8/22/2002 4:17 PM Page 2