Tripp Lite ECO750UPS Power Supply User Manual


 
Alarms Audible alarms for ON BATTERY, LOW BATTERY and OVERLOAD status
Switches Main power switch controls ON, OFF, SELF-TEST and ALARM CANCEL functions. Second switch enables "ECO"
outlet switching
SURGE / NOISE SUPPRESSION
AC surge suppression 420 joules
AC suppression
response time
Instantaneous
Dataline suppression Single line TEL/DSL
EMI / RFI AC noise
suppression
> 40dB@1MHz
PHYSICAL
Shipping weight (lbs) 10.1
Shipping weight (kg) 4.6
Shipping Dimensions
(HWD/in)
4.6 x 15.04 x 9.84
Shipping Dimensions
(HWD/cm)
11.7 x 38.2 x 25
Unit weight (lbs) 8.8
Unit weight (kg) 4
Unit Dimensions
(HWD/in)
3.07 x 12.22 x 6.91
Unit Dimensions
(HWD/cm)
7.8 x 31 x 17.5
Material of
construction
ABS
Form factors
supported
Tower, Desktop, Wall-mount
Integrated keyhole
mounting tabs
Keyhole mounting slots enable wall-mount installation
ENVIRONMENTAL
Relative Humidity 0 to 95%, non-condensing
Storage Temperature +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Operating
Temperature
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Line mode BTU/hr.
(Max.)
4 BTU/Hr. / 99% line power efficiency (fully charged battery)
COMMUNICATIONS
Network monitoring
port
USB (HID Compliant)
Software and cabling
included
Includes USB interface cable, PowerAlert software available via free download
WatchDog
compatibility
Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft
reboot of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications
LINE / BATTERY TRANSFER
Transfer time from
line power to battery
mode
AC to battery mode: 6 milliseconds / Battery to AC mode: 3 milliseconds
Low voltage transfer
to battery power
Switches to battery power as line voltage decreases to 99 volts or less. Resets back to line power mode as line
voltage increases to 104V or higher
High voltage transfer
to battery power
Switches to battery power as line voltage increases to 139V or higher. Resets back to line power mode when line
voltage decerases to 135V or lower