Filter
Top Products
Hardware
Installation
Make sure the power to the computer is turned OFF and
the computer is disconnected from the wall outlet. To
prevent static electricity from damaging your equipment,
please ground yourself by touching a metal object (for
example: the casing to your PC).
1) Remove the computer’s outer case to expose the
internal components.
2) Locate an available PCI slot on your motherboard and
insert the new card into that slot. Press down firmly on
the card to make sure it’s seated properly. You may
have to unscrew a small plate that’s preventing outside
access to the PCI slot.
3) Insert and tighten a screw to secure the Card to the
computer’s case.
4) Replace the top cover to your computer and fasten the
necessary screws.
5) Turn ON your computer and begin the Driver
Installation.
200202128 Manual in 5 Languages.qxd 3/21/02 4:41 PM Page 3