Filter
Top Products
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: OMNI1000ISO
OmniSmart UPS with built-in isolation transformer - Provides battery support during blackouts, voltage
regulation during brownouts and continuous line filtering with built-in isolation transformer
Highlights
1000VA line interactive UPS with built-in isolation transformer
Maintains 120V nominal output over an input range of 81 to 143V
Built-in USB communications port
Input: NEMA 5-15P (120V 15A) / Output: 6 NEMA 5-15R (120V)
2 year product warranty
Description
Tripp Lite's OMNI1000ISO offers complete UPS protection with built-in line-interactive voltage regulation, intelligent monitoring and unattended
shutdown capability. Built-in isolation transformer with Faraday shield offers full isolation and complete common mode noise rejection. 1000VA
power-handling capacity supports point-of-sale applications, computers, internetworking equipment and home theater systems during commercial
power failures. Line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels,
reserving battery power for use during complete power failures. Built-in USB communications port works with PowerAlert Software and cabling to
provide automatic unattended shutdown of connected network and PC applications.
Applications
Ideal for providing a continuous clean grounding reference, voltage regulation and backup power for sensitive POS, networking and
home-theater applications
Package Includes
OMNI1000ISO UPS System
USB cable
Owner's manual with warranty information
Features
1000VA line-interactive UPS with Faraday-shielded, low-impedance isolation transformer delivers full isolation from potential damage and
performance problems
Provides immunity from EMI/RFI line noise in both normal and common modes. Delivers clean signal-reference ground, reducing data
errors and audio/video distortion
Automatic voltage regulation (AVR) automatically corrects incoming voltage to keep equipment working through low voltage (brownouts) as
low as 81V and overvoltages as high as 143V without consuming battery power
Supports loads up to 1000VA/700W
Half-load runtime of 24 min. (500VA/350W); full load runtime of 8 min. (1000VA/700W)
5 diagnostic LEDs indicate AC present, on battery, voltage correction status, overload and battery low/replace
Electrostatic discharge (ESD) resistance reduces potential static damage to connected electronics
Built-in USB port and PowerAlert Software (free via web download) provide safe, unattended system shutdown during extended blackouts