Filter
Top Products
1-USB port for monitoring interface
Complete surge protection, line isolation and EMI/RFI noise filtering
2 phone line surge suppression for modems, fax machines and other phone accessories
2 year product warranty
Complete remote monitoring cabling included, PowerAlert UPS management software available via free download
4 diagnostic LEDs indicate AC present, on battery, voltage correction & battery low/replace
Battery replacement door
Grounding lug
Specifications
SYSTEM OVERVIEW
Voltage compatibility 230V AC
Frequency
compatibility
50/60 Hz (auto-sensing)
OUTPUT
Output VA 350
Output watts 225
Output nominal voltage 230V AC
Output voltage
regulation
LINE MODE: Sine wave line voltage 230V (-18% / +8%)
Output frequency
regulation
LINE MODE: Passes line frequency of 50/60Hz +/-10%
Outlet quantity / type 6 IEC320 C13 output connections
INPUT
Maximum input amps 1.8A / 414 watts
Input connection type IEC320 C14 inlet
Input cord length 6 inch dongle, 16 gauge
Recommended
Electrical Service
10A 230V
BATTERY
Full load runtime 15.5 minutes (350VA)
Half load runtime 37 minutes (175VA)
DC system voltage 12 VDC
Typical battery lifespan 3-6 years, depending on usage
Battery recharge rate 2-4 hours to 90%
Replacement Battery
Cartridge
RBC52 (quantity 2)
VOLTAGE REGULATION
Voltage regulation
description
Line interactive UPS offers a single boost level of brownout correction to maintain usable, computer grade output
Direct pass through Input voltages between 200and 266V AC are passed through unchanged
Brownout correction Input voltages between 159 and 199V AC are boosted by 14%
LEDS ALARMS & SWITCHES
Front panel LEDs Yes, includes 4 front-panel status indicator LEDs for line power, battery power, voltage regulation and battery
low/replace status
Alarms Audible alarm indicates power failure conditions, silenceable via alarm cancel switch. Once cancelled, alarm will
resume when approximately 2 minutes of battery operation remain (assuming full load)
Switches Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
SURGE / NOISE SUPPRESSION