Filter
Top Products
Features
120V 30A maximum capacity (agency de-rated to 24 amps) Switched, Metered and Monitored Power Distribution Unit (PDU) with built-in
web/network interface in 0U vertical rack form factor
Includes attached L5-30P input plug and 24 x 5-15/20R controllable outlets arranged in two 12-outlet load banks
Supports individually controllable output receptacles, current metering, network monitoring and remote control via built-in Web/network
monitoring and control card
Provides the ability to turn on, turn off, recycle or lock out power to each individual PDU receptacle on a programmable or real-time basis
Switchable outlets enable a number of advanced networking abilities, such as remote reboot on-demand of locked IT equipment, custom
power-on/power-off outlet sequencing, automatic load shedding of optional loads during power failures and disabling unused outlets to
prevent the connection of unauthorized equipment loads
Remote interface provides data regarding input power conditions, load level and individual outlet power status via secure network or web
browser interface
Supports notification and logging of all major power events and user-specified alarm thresholds
Optional ENVIROSENSE temperature and humidity probe enables remote monitoring of environmental conditions and the ability to report
conditions from up to two contact-closure sensors
Optional ENVIROSENSE probe also supports the connection of up to three user-supplied contact-closure sensors to selectively notify,
monitor and log reported conditions, such as rack door access
DHCP/Manual configuration support enables network settings to be automatically assigned to the card, or manually assigned via permanent
IP addresses
10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network
Real-time clock support maintains the time of day and date even if the PDU is shut down and unpowered
2-tier level access enables an administrator and a guest to log into the web browser for monitoring and/or management of all intelligent
PDUs and similarly equipped UPS systems
Alert notifications via email or SNMP traps provide immediate event notification
Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP,
BOOTP, NTP
Front panel ammeter with pushbutton toggle switch displays power consumption for all three loading segments (12 outlets in bank 1, 12
outlets in bank 2 and total load of banks 1 and 2 combined)
On initial power-up, outlets are automatically energized at 250 millisecond intervals to prevent inrush-related equipment interaction and
mains circuit overloads
Each 12-outlet bank is protected by a separate 20A circuit breaker
Included cord retention brackets keep vital network equipment plugged in and continuously powered
70-in. 0U vertical rack installation supported with included rackmount brackets
Tooless mounting supported in button-mount compatible racks
Specifications
SYSTEM OVERVIEW
Voltage compatibility 120V
Frequency
compatibility
50/60 Hz
OUTPUT
Output nominal
voltage
120V
Outlet quantity / type 24 x 5-15/20R
Customized load
management
receptacles
Each outlet is individually controllable via remote interface
Overload protection Outlets are arranged in two separately breakered 20A banks. 12 upper outlets are protected by the upper circuit
breaker; 12 lower outlets are protected by the lower circuit breaker
INPUT
Maximum input amps 30A maximum (Agency de-rated to 24A continuous)
Input connection type Attached L5-30P input plug
Input cord length 10 ft./3m