Tripp Lite PR15 Power Supply User Manual

Open as PDF

of 4

Troubleshooting

If the power supply stops working, check the DC output connections and tighten if loose.

Check the external fuse. If blown, replace with the same amperage size only. Units with an

internal fuse should be checked by a qualified technician.

1-Year Limited Warranty

Tripp Lite warrants its Inverter/Chargers to be free from defects in materials and workmanship for a 12 month period from the date of initial purchase.

Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.To obtain service under this warranty

you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite service center.Products must be returned to Tripp Lite

or an authorized Tripp Lite service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered

and proof of date and place of purchase.This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or

has been altered or modified in any way, including opening of the unit’s casing for any reason.This warranty applies only to the original purchaser who must

have properly registered the product within 10 days of purchase.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE.Some states do not permit limitation or exclusion of implied warranties;therefore, the aforesaid limitation(s)

or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is

not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes,

claims by third parties, or otherwise.

Tripp Lite has a policy of continuous improvement.Specifications are subject to change without notice.

Specifications

ICS* Continuous Ripple Dimensions Weight General

Model Amps Duty Amps Fusing Voltage (H × W × D. in.) (lbs.) Applications Guide

PR3 3 2 Internal .05 volt max. 3.5 × 5.5 × 7 5.8 Home use of CB radios; car tape players

PR3UL** 3 3 Internal .05 volt max. 3.5 × 5.5 × 7 5.8 Home use of single-sideband (SSB) CB

radios; car tape players; tape recorders

PR4.5 4.5 3 Internal .05 volt max. 4.3 × 5.5 × 8.5 6.6 Home use of single-sideband (SSB) CB

radios; car tape players; tape recorders

PR7 7 5 Chassis .05 volt max. 4.3 × 5.5 × 9.5 7.4 Home use of single-sideband (SSB) CB

Mount radios; high power car stereos; low

power VHF/UHF ham radios.

PR10 10 7.5 Chassis .05 volt max. 4.3 × 5.5 × 9.5 10.3 30 watt transmitters; VHF/UHF ham

Mount radios; commercial/land-mobile

radios; low power linear amps.

PR12 12 9.5 Chassis .05 volt max. 4 × 5.5 × 9 12.2 40 watt transmitters; VHF/UHF ham

Mount radios; commercial/land-mobile

radios, low power linear amps.

PR15 15 12 Chassis .05 volt max. 4 × 5.5 × 11 13.2 50 watt transmitters; VHF/UHF ham

Mount radios; commercial/land-mobile

radios; low power linear amps.

PR20 20 16 Chassis .05 volt max. 4 × 5.5 × 11 15.7 60 watt transmitters; VHF/UHF ham