Tripp Lite SMX1000LCD Power Supply User Manual


 
Full load runtime
(minutes)
3 min. (500w)
Half load runtime
(minutes)
11 min. (250w)
DC system voltage (VDC) 12
Battery recharge rate
(included batteries)
Less than 20 hours from 10% to 90%
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 171
Undervoltage correction Input voltages between 199 and 171 are boosted by 14%
LEDS ALARMS & SWITCHES
LED Indicators Front panel LCD display
Front panel LCD display Backlighted LCD screen indicates input voltage, 5-bar battery charge level, overload, AVR, on battery and
replace battery status; LCD screen rotates for rack/tower viewing
Alarms Audible alarm indicates power-failure, low-battery and overload status; alarm can be disabled using PowerAlert
software
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
480
UPS AC suppression
response time
Instantaneous
UPS Dataline
suppression
1 line TEL/DSL (1 in / 1 out)
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form factors
supported with included
accessories
Tower
Primary form factor Tower
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
12 x 3.5 x 6.5
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
30.5 x 8.9 x 16.5
Installed whole system
dimensions in
secondary form factor
(height x width x depth /
cm)
8.9 x 30.5 x 16.5
Secondary form factor Horizontal desktop placement