Tripp Lite SMX750SLT Power Supply User Manual


 
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 289V
Overvoltage correction Voltage reduction of 13% applies when input is 232-265 (220V), 243-277 (230V), 254-289 (240V)
Undervoltage correction Voltage boost of 15% applies when input is 178-198 (220V), 186-207 (230V), 194-216 (240V)
Severe undervoltage
correction
Voltage boost of 32% applies when input is 151-173 (220V), 158-181 (230V), 165-189 (240V)
LEDS ALARMS & SWITCHES
LED Indicators 9 LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter
for load and battery charge level
Alarms Audible alarm indicates power failure and overload conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches
support nominal voltage selection
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
480
UPS AC suppression
response time
Instantaneous
UPS Dataline suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form factors
supported with included
accessories
Tower
Primary form factor Tower
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
10.25 x 6.75 x 13.25
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
26 x 17.1 x 33.7
UPS / Power Module
weight (lbs)
34.1
UPS / Power Module
weight (kg)
15.5
UPS Shipping dimensions
(height x width x depth /
inches)
14 x 9.75 x 18.5
UPS Shipping dimensions
(height x width x depth /
cm)
35.6 x 24.8 x 47
Shipping weight (lbs) 38.6