Tripp Lite SPS415HGULTRA Surge Protector User Manual


 
201009100 • 933056-EN
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
US Patent #7,375,939 and other patents pending
Installation
1) Connect Your Surge Suppressor to Your AC Power Line
Plug the power cord into a utility outlet. The surge suppressor’s power cord should only be
connected to a standard 3-wire grounded 120V AC 60 Hz outlet.
2) Connect AC Equipment to Your Surge Suppressor
Plug the AC power cords of your equipment into your surge suppressor. Do not use
extension cords or adapters that eliminate the connection to ground. DO NOT
OVERLOAD your surge suppressor. Each outlet can handle a load of up to 12A, but do not
exceed a total load of more than 12A for all outlets. If the circuit breaker trips, outlets will
cease to provide power. Reduce the load on the surge suppressor down to your unit’s amp
rating by unplugging excess equipment, then depress the circuit breaker button to reset and
restore power.
201009100.indd 2 11/15/2010 4:59:03 PM