Tripp Lite U239-UE1 Computer Drive User Manual


  Open as PDF
of 4
 
3
Installation
1. Make sure that the power to the computer you are connecting is turned off.
2. Using the included USB cable or eSATA cable, connect the unit to your
computer. Note: Both USB and eSATA cables can be connected at the
same time, but the USB cable must be connected if you are using the
USB 2.0 hub ports.
3. Insert your 2.5” or 3.5” SATA hard drive into the slot on the top of the unit.
4. Optional – Connect up to two USB devices to the USB 2.0 hub ports on
the front of the unit. Note: The USB cable must be connected if you are
using the USB 2.0 hub ports.
5. Connect the external power supply to the unit, and then plug it into an
appropriate power source.
6. Turn on the power to the unit.
7. Turn on the power to the connected computer.
12-133 93-3239.indd 3 8/17/2012 10:48:22 AM
 previous