Filter
Top Products
Internal low-impedance isolation transformer with Faraday shield offers 100% isolation from the input AC line
Full UL60601-1 medical-grade listing with hospital-grade plug and outlet receptacles makes Isolator Hospital Grade transformers ideal for
the protection of sensitive electronic equipment in patient-care areas.
Reduces the cumulative leakage current of the Isolator and connected equipment to levels less than 100 microamps.
Secondary neutral-to-ground bonding eliminates common mode noise, providing an isolated ground reference for sensitive equipment
Serves as an inexpensive alternative to dedicated circuits and site electrical upgrades
Removes EMI/RFI noise, utility switching transients, load-generated harmonics and ground loops
Additional surge suppression components placed at the line input and output combined with full line isolation provide continuous filtering of
a full range of power line noise in all modes
Active transformer filtering offers continuous common-mode noise rejection with no wearable parts; unique ability to reduce surges in the
worst of power environments to harmless levels
Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode
Includes 4 widely spaced NEMA 5-15R hospital-grade output receptacles, a 6-ft. power cord, hospital-grade input plug, circuit breaker
overload protection and lighted power switch.
Rugged all-metal unit housing; ships ready for upright tower placement in any industrial, medical, office or network environment
2-year limited product warranty
Specifications
OVERVIEW
Amp Capacity 4.2A at 120V AC
Efficiency 96%
Form Factor Small tower format
Input Plug Type NEMA 5-15P-HG Hospital-Grade
Leakage Current Less than 100 microamps
Let-through Voltage
(Combination Wave)
L-N: 250V L-G: 250V N-G: 0.5V
Let-through Voltage (Ring
Wave)
L-N: 20V L-G: 20V N-G: 0.5V
Noise Suppression Rating 35-65 DB
Nominal Voltage / Frequency 120 /60Hz
Output Receptacle Qty / Type 4 NEMA 5-15R-HG Hospital-Grade
Over Current Protection 4.5A circuit breaker
Shipping Weight 23.20 lbs./10.52 kg
Suppression Joule Rating 680 (510 input/170 output)
Surge Test Conditions Per ANSI/IEEE C62.41 - IEEE587 Cat. A & B test waveforms
Total Harmonic Distortion Less than 1%
Transformer Type Medical-grade, low impedance transformer-based line isolation transformer
Unit Dimensions (HWD/in.) 5.75 x 6.25 x 9.25
VA / Watt Capacity 500
Warranty 2-year limited product warranty
INPUT
Input cord length 6.00 ft /1.83 m
PHYSICAL
Cooling method Convection