Filter
Top Products
Chapter 1 Introduction
Congratulations on the purchase of your new SNMPWEBCARD. Your SNMPWEBCARD will connect your UPS to your LAN. This will
allow you to monitor and control the UPS from any PC on the LAN, using either:
• SNMP protocol and popular SNMP network management platforms such as HP OpenView, IBM NetView, etc., or
• A Web browser.
SNMPWEBCARD System Requirements
• Tripp Lite UPS with a standard card slot.
• Ethernet networking environment using the TCP/IP protocol.
• SNMP-based management station such as:
HP OpenView,
IBM Tivoli
Sun SunNet Manager,
Novell ManageWise
Or
• Web browser supporting HTML frames, forms and Java, such as:
Netscape Navigator 3.0 or later
MS Internet Explorer 4.0 or later
• For “Terminal Mode” configuration, a terminal emulation (communication) package.
1