Filter
Top Products
23
3.7 Using the PC USB Keyboard with Printer USB Host Interface
(Factory option for TDP-225W/324W model)
1. Turn off the printer power.
2. Plug in the PC USB keyboard into printer USB host interface.
3. Turn on the printer power.
4. After pressing the F1 key of the keyboard, the printer LCD will display as following.
5. Use up ↑ or down ↓ key of the keyboard to move “>” cursor to select either DRAM,
FLASH or CARD that you previously saved file in and press Enter key of the keyboard to
list files.
6. Select the file and press Enter key to run the .BAS program.
7. Then, you can enter the data from keyboard for stand-alone application.
Press PC keyboard F1 key to start this function.
Press up ↑ or down ↓ key to move the cursor to the option.
Press Esc key to return to previous menu.
Press Enter key to enter/run cursor located option.
Press Ctrl + C keys to reset the printer and enter “Ready”.
Note: USB host is a factory option interface for TDP-225W/324W model.
File List
>
DRAM
FLASH
FLASH List
>
TEST1.BAS
TEST2.BAS