Filter
Top Products
38
3.2.2 IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus>
keys to change the value of the selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
IDE Configuration
SATA Configuration
Configure SATA as
SATA0 (PM)
SATA1 (PM)
SATA2 (SM)
SATA3 (SM)
SATA4 (PM)
SATA5 (PM)
Hard Disk Write Protect
IDE Detect Time Out (Sec)
[Enhanced]
[IDE]
[Disabled]
[35]
Select whether the IDE
channels should be
initialized in Compatible
or Enhanced mode of
operation.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
IDE Configuration
Enhanced
SATA Configuration
Compatible
This defines the operation mode of
SATA channel.
IDE
RAID
Configure SATA as
AHCI
Select legacy IDE, RAID or AHCI as the
SATA interface.
Disabled
Hard Disk Write Protect
Enabled
Enable/Disable device write protection.
This will be effective only if device is
accessed through BIOS.
IDE Detect Time Out
(Sec)
0~35
(at 5 interval)
Select the time out value for detecting
ATA/ATAPI device(s).