Filter
Top Products
22
http://www.TYAN.com
2.25– Installing the Power Supply
There are three power connectors on your Thunder i7505 S2665. By default, the Thunder i7505
S2665 requires that you have an EPS12V power supply that has a 24-pin and an 8-pin power
connector. The extra 6-pin AUX power connector is recommended if you plan on using an AGP
Pro video card. Please be aware that ATX 2.x, ATX12V and dual ATXGES (24+8-pin) power
supplies are not compatible with the board.
EPS 12V power connector
24-pin
power connector
8-pin
power connector
6-pin
power connector
S2665 with PCI/AGP video card Required Required Not required
S2665 with AGP Pro video card Required Required Recommended
24-pin (main power connector)
8-pin (12V power connector)
6-pin (AUX power connector)
1. Disconnect power supply from electrical outlet
2. Connect 8-pin 12V power connector
3. Connect 6-pin AUX power connector (recommended if using an AGP pro video card)
4. Connect 24-pin main power connector
5. Connect power cable to power supply to power ou tlet
NOTE
Certain EPS12V power supplies do not have the 6-pin AUX power connector.
Please check with your power supply vendors if you plan to use an AGP Pro
video card.
NOTE
YOU MUST unplug the power supply before plugging the 24-pin, 8 -pin and 6 -pin
cables to motherboard connectors.